Connect a Modbus RTU Master to a MicroLogix PLC

460ETCMRS

Easily connect legacy Modbus RTU Masters to up to five MicroLogix PLCs
Buy Now!

Get your Modbus RTU Master Connected Directly to the Data Table of your MicroLogix PLC
The 460ETCMRS moves data between a Modbus RTU Master device and up to 5 different
MicroLogix PLC’s. It’s a simple tool to help you integrate legacy or low cost Modbus RTU
controllers into your MicroLogix Architecture.

Best of all the product is Made in the USA, is always in stock and comes with 5 year warranty.

How Does the Data Move In and Out of the PLC?
You allocate two areas of tags or register blocks in your MicroLogix PLC. One area is a
user defined set of write only tags or register blocks accepting data from your Modbus RTU
device. The other area is full of read only tags or register blocks to send data to your Modbus
RTU device. You directly map Modbus RTU register and coil data into read and write locations
in the data table of your MicroLogix PLC.

It’s really that simple. Need to modify your data as it passes from one protocol to the other?
No problem. Each data mapping you apply can be modified.

Why use Real Time Automation as a Gateway Supplier?
The 460ETCMRS provides an option to access Modbus RTU data without having to upgrade
your PLC or get an expensive in rack solution. While there are certainly a number of other
companies offering stand alone gateways, there is no one who provides the level of support
and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest
answers and recommendations even if that means recommending someone else’s solution.
When you get support, it is from an engineer who had a hand in the product’s development,
and support doesn’t require a ticket or 24 hour wait. We are unashamed of the fact that we
are a smaller company because that means you mean a lot more to us.
Try the RTA difference today