N34 Hardware Platform

The N34 hardware platform features a 5-pin terminal block, one DB9 port, RJ45 for Ethernet and a pluggable screw terminal for power. The N34 platform is the only platform featuring CAN.

N34 HIGHLIGHTS:

  • 1 5 Pin Screw Terminal
      Modes available:

    • RS-232
    • RS-485
    • RS-422
    • CAN
  • 1 DB9 Port
      Modes available:

    • RS-232
    • RS-485
    • RS-422
    • CAN
  • 1 Ethernet Port
  • Certifications: CE, UL HAZLOC Class 1, Div 2
  • Device configuration backup via SD Card

Specifications

Dimensions4.2” x 3.25” x 1”
Ports Serial Communication
Port 0: 5 Pin Terminal Block
Modes available: RS-232, RS-485, RS-422, CAN

Port 1: Male DB9
Modes available: RS-232, RS-485, RS-422, CAN

Limits
1 x RS-232
2 x RS-485
1 x RS-422
1 x CAN

Ethernet Communication
1 Ethernet Port
Speed/Link Available
Ethernet Link: Auto-Negotiate, 10 Mbps; Half Duplex, 10 Mbps; Full Duplex, 100 Mbps; Half Duplex, 100 Mbps; Full Duplex

Power Barrel Connector
5 Pin Terminal Block (Pins 1 & 5)
Certifications UL
C/UL
CE
FCC
RoHS Compliance
LEDs1 Power LED
2 Application LEDs

Jumper & Pinout Configurations

RS-232 Jumper Configuration

*Dual RS-232 not supported

RS-485 Jumper Configuration

*If configuring both ports for RS-485/RS-422 or RS-485/RS-485, refer to the Alternate Jumper Configuration Tab.

RS-422 Jumper Configuration

*Dual RS-422 not supported

*If configuring both ports for RS-485/RS-422, refer to the Alternate Jumper Configuration Tab.

CAN Jumper Configuration

*Dual CAN not supported

RS-232 Jumper Configuration

*Dual RS-232 not supported

RS-485 Jumper Configuration

*If configuring both ports for RS-485/RS-422 or RS-485/RS-485, refer to the Alternate Jumper Configuration Tab.

RS-422 Jumper Configuration

*Dual RS-422 not supported

*If configuring both ports for RS-485/RS-422, refer to the Alternate Jumper Configuration Tab.

RS-CAN Jumper Configuration

*Dual CAN not supported

RS-485 Jumper Configuration

RS-422 Jumper Configuration

Still not sure which hardware platform is right for your and your project?