Connect BACnet MS/TP Devices to a PLC5E


Connect BACnet MS/TP Devices to a PLC5E
Buy Now!

Connect PLC5Es to BACnet MS/TP Slaves
The 460ETCBM moves data between up to 32 BACnet MS/TP devices and 1-5 PLC5Es.

With the 460ETCBM you are making a direct connection between BACnet MS/TP objects and user defined Tags or Registers in the data table of your PLC5E. There is no polling from the PLC or Ethernet/IP scan lists to arrange. This is a direct connection between your device data and the data table of your PLC.

How Does the Data Move In and Out of the PLC?
You allocate two areas of tags or register blocks in your PLC5E. One area is a user defined set of write only tags or register blocks accepting data from BACnet MS/TP. The other area is full of read only tags or register blocks to send data to your BACnet MS/TP BMS. You directly map BACnet MS/TP Analog and Binary data into read and write locations in the data table of your PLC5E.

It’s really that simple.

Why Use Real Time Automation as a Gateway Supplier?
The 460ETCBM provides an option to access a BACnet MS/TP system with a PLC5E without an expensive in-rack solution. While there are certainly a number of other companies offering stand alone gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations even if that means recommending someone else’s solution. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24 hour wait. We are unashamed of the fact that we are a smaller company because that means you mean a lot more to us.