Connect a DeviceNet Master to DF1 Devices

Easily map your legacy PLC data into a DeviceNet Master

SKU: 460DSDFM

460DSDFM

Price $890.95$940.39

Clear

Map Your Legacy PLC Data Tables Into a DeviceNet Master
You can now make your legacy serial PLCs look like a DeviceNet Slave. Any of your old, serial PLCs like the PLC5, SLC, or MicroLogix can now provide cyclic data to a DeviceNet Master.

It’s the perfect tool to keep those old legacy PLCs from the scrap pile and be useful in a DeviceNet environment.

How Do I Use the 460DSDFM in My Application?
The mapping is very straight forward. PLC data table values like N7:200 and F9:1 are mapped directly into the Input and Output assemblies of the cyclic data transfer.

No special message instructions or ladder logic is required to access the data table of the DF1 PLCs.

It really is that simple.

Why Use Real Time Automation as a Gateway Supplier?
While there are certainly a number of other companies offering gateways, there is no one who provides the level of support and service that you receive from RTA. When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24-hour wait.

Try the RTA difference today.

Weight2 lbs
Dimensions11 × 9 × 4 in
Platform

N34

Mounting

Din Rail, Din Rail with Power Supply, Panel Mount, Panel Mount with Power Supply, Wall Mount

Cabling

Generic 1761-CBL-PM02, None, Null Modem Cable

Reviews

There are no reviews yet.

Be the first to review “460DSDFM”

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

DeviceNet Slave Features

DeviceNet Operation Modes: DeviceNet Slave
Supported Data Types: Int8, int16, int32, int64, uint8, uint16, uint32, uint61, float, double float, binary8, binary16, binary32
Maximum Connections: 1
Maximum Input Size: 240 Bytes in up to 15 Data Groups
Maximum Output Size: 240 Bytes in up to 15 Data Groups

DF1 Master Features

Operation Modes: DFM Full Duplex and DFM Half Duplex
PLCs Supported: MicroLogix 1000, SLC 5/03 5/04 5/05, most PLC5s
Maximum number of Devices supported: 1 in Full Duplex Mode, 32 in Half Duplex
Data Type Supported: 100 Integers or 100 Binaries, or 50 floats, 82 character string per scan line
Scan lines: 100 input, 100 output
Physical Connections: RS485 and RS232

Gateway Security
You can configure up to 9 different users access to diagnostic and configuration screens.

Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.

Generic MicroLogix Programming Cable, a replacement for Allen-Bradley 1761-CBL-PM02:

  • Programming Connector Type: Round 8 Pin and Right Angle (90 Degree) Connector
  • DB9P RS232 Connector Type: Female
  • Cable Length: 3m / 9.8ft
  • Note: Replace 1761-CBL-PM02 Allen Bradley Micrologix Series. Not Made by Allen-Bradley.

Null Modem Cable:

  • 6-foot cable
 
460DSDFM-N34
DATASHEET  USERGUIDE
Click here to download our Gateway Comparison PDF