N700 Hardware Platform

The N700 hardware platform features two DB9 ports, RJ45 for Ethernet and a pluggable screw terminal for power.


  • 2 DB9 Ports
      Modes available:

    • RS-232 and RS-232
    • RS-232 and RS-485
    • RS-232 and RS-422
  • 1 Ethernet Port
  • Certifications: UL, C/UL, CE, FCC, RoHS
  • Device configuration backup via SD Card


Dimensions4.2” x 3.25” x 1”
Ports Serial Communication
Port 0: Male DB9
Modes available: RS-232, RS-485, RS-422

Port 1: Male DB9
Modes available: RS-232

2 x RS-232
1 x RS-485
1 x RS-422

Ethernet Communication
1 Ethernet Port
Speed/Link Available
Ethernet Link: Auto-Negotiate, 10 Mbps; Half Duplex, 10 Mbps; Full Duplex, 100 Mbps; Half Duplex, 100 Mbps; Full Duplex

Power Two Pin Terminal Block
7V – 28V DC
125mA @ 24V DC
Certifications UL
RoHS Compliance
LEDs1 Power LED

Port Connections

The factory default port settings for Port 0 and Port 1 are RS-232. Port 0 can be configured for RS-232, RS-485, or RS-422. Port 1 can only be configured for RS-232.

Jumper Configuration

The default jumper configurations are setup for the following serial modes:

Port 0: RS-232

Port 1: RS-232

Pinout Configuration

Still not sure which hardware platform is right for your and your project?