Product Description
Connect Modbus TCP/IP Server Devices to EtherNet/IP Adapters
The 460ECMC moves Registers and Coils between a Modbus TCP network of Server devices and an EtherNet/IP network of Adapter devices. It’s the perfect tool to tie in all the Modbus TCP/IP devices in your automation system. Easily interface existing device networks without having to add a controller.
How Do I Use 460ECMC in My Application?
BACnet/IP data will be mapped into 10 Profibus DP slots. Each Slot will be assigned a type of Int8, int16, int32, int64, Uint8, Uint16, Uint32, Uint64, float, double, binary8, binary16, or binary32. The Slot can consist of up to 244 bytes of data from your BACnet/IP Client device.
Why Use Real Time Automation as a Gateway Supplier?
While there are certainly other companies offering protocol gateways, there is no one who provides the level of support and service that you receive from RTA.
When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24-hour wait.
Try the RTA difference today.
Ethernet/IP Scanner Features
Operation Modes
Class 1 I/O Scanner (minimal Adapter is required and supported)
Message Support
Implicit Class 1 Cyclic I/O, Explicit not supported.
Data Types
BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Adapter Devices
32
Max Data Per Adapter Connection
Up to 496 bytes in each direction
Modbus TCP/IP Client Features
Modbus Operation Modes
Modbus TCP/IP Client
Function Codes Supported
1, 2, 3, 4, 5, 6, 15 & 16
Swapping
Byte and Word Swapping
Maximum Modbus TCP/IP Server Devices
32
Number Read/Write Scan Lines per Server Device
200 Total - 100 reads & 100 writes
Scan Line Support
Up to 125 Registers or 512 Coils
Gateway Security
You can configure up to 9 different users access to diagnostic and configuration screens.
Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.
Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.
Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.
Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.
Click
here to download our Gateway Comparison PDF