Turn Serial DF1 PLCs into an EtherNet/IP Adapter

Easily map your legacy PLC data to EtherNet/IP

SKU: 460ESDFM

460ESDFM

Price $805.00$913.00

Clear

Product Description

Map Your Legacy PLC Data Tables Into EtherNet/IP Adapter I/O With the 460ESDFM
You can now make your legacy serial PLCs look like an EtherNet/IP Adapter! Any of your old, serial PLCs like the PLC5, SLC, or MicroLogix can now provide cyclic data to an EtherNet/IP Scanner.

It’s the perfect tool to keep those old legacy PLCs from the scrap pile and extend their useful life.

How Do I Use the 460ESDFM in My Application?
For most applications, the mapping is very straight forward. PLC data table values (like N7:200 and F9:1) are mapped directly into the Input and Output assemblies of the cyclic data transfer.

You don’t have to implement any message instructions or ladder logic in the legacy DF1 PLCs.

It really is that simple.

Why Use Real Time Automation as a Gateway Supplier?
While there are certainly a number of other companies offering gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24-hour wait.

Try the RTA difference today.

  • Manual
  • 3’ power cable with Flying leads
  • 5 Year Hardware Warranty
  • IPSetup software — Automatically locates RTA Gateway on the network
  • Unlimited Firmware Feature Upgrades for Life
  • CAT5 Cross over cable for direct connection to PC during programming
  • Complete, Unlimited Access to our Industry Leading Support Staff

Ethernet/IP Adapter Features

Operation Modes
EtherNet/IP Adapter

Message Support
Implicit, Explicit UCMM

Data Types
BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double

Maximum EtherNet/IP Scanner Devices
Up to 10

Max Data Per Adapter Connection
Up to 480 bytes in each direction

DF1 Master Features

Operation Modes
DFM Full Duplex and DFM Half Duplex

PLCs Supported
MicroLogix 1000, SLC 5/03 5/04 5/05, most PLC5s

Maximum number of Devices supported
1 in Full Duplex Mode, 32 in Half Duplex

Data Type Supported
100 Integers or 100 Binaries, or 50 floats, 82 character string per scan line.

Scan lines
100 input, 100 output

Physical Connections
RS485 and RS232

Gateway Security

You can configure up to 9 different users access to diagnostic and configuration screens.

Alarming

Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table

Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters

Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page

Allows users to see and log start up sequences, protocol specific messages & error messages.

 

Generic MicroLogix Programming Cable, a replacement for Allen-Bradley 1761-CBL-PM02:

  • Programming Connector Type: Round 8 Pin and Right Angle (90 Degree) Connector
  • DB9P RS232 Connector Type: Female
  • Cable Length: 3m / 9.8ft
  • Note: Replace 1761-CBL-PM02 Allen Bradley Micrologix Series. Not Made by Allen-Bradley.

Null Modem Cable:

  • 6-foot cable
 
460ESDFM-N34
DATASHEET  USERGUIDE
460ESDFM-N700
DATASHEET  USERGUIDE
460ESDFM-NNA1
DATASHEET  USERGUIDE
460ESDFM-NNA4
DATASHEET  USERGUIDE
Click here to download our Gateway Comparison PDF