Connect Modbus TCP/IP Devices to a Modbus RTU Controller

Connect up to 32 Modbus TCP/IP server devices to a Modbus RTU Master

SKU: 460MCMRS

460MCMRS

Price$625.00$976.25

Clear

Product Description

Get Your Modbus TCP/IP Server Devices Connected to a Modbus RTU Master
The 460MCMRS moves data between up to 32 Modbus TCP/IP Server devices and a Modbus RTU Master device. With the 460MCMRS register and coil data can be freely moved between your Modbus RTU and Modbus TCP/IP networks.

Best of all the product is Made in the USA, is always in stock and comes with a 5 year warranty.

How Do I Use the 460MCMRS in My Application?
To your Modbus TCP/IP Server devices the gateway will act as a Modbus TCP/IP Client. To your Modbus RTU Master device the gateway acts as a Modbus RTU Slave. In the gateway you configure what data it will read from and write from each Server and Master device connection.

In the translation you are able to map register and coil data from any device to any other device connected to the gateway. You could (although unlikely) map data from a single Modbus TCP/IP Server device to 31 other Modbus TCP/IP Server devices, loop data back to the same device and also send data to a Modbus RTU Master device at the same time.

Why Use Real Time Automation as a Gateway Supplier?
The 460MCMRS provides an option to access Modbus TCP/IP devices on your Modbus RTU network. While there are certainly a number of other companies offering stand alone gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations even if that means recommending someone else’s solution. When you get support, it is from an engineer who had a hand in the product’s development, and that doesn’t require a ticket or 24 hour wait. We are unashamed of the fact that we are a smaller company because, that means, you mean more to us.

  • Manual
  • 3’ power cable with Flying leads
  • 5 Year Hardware Warranty
  • IPSetup software — Automatically locates RTA Gateway on the network
  • Unlimited Firmware Feature Upgrades for Life
  • CAT5 Cross over cable for direct connection to PC during programming
  • Complete, Unlimited Access to our Industry Leading Support Staff

Modbus RTU Slave Features

Modbus Operation Modes
Modbus RTU Slave

Function Codes Supported
1,2,3,4,5,6, 7,15 & 16

Swapping
Byte and Word Swapping

Maximum Modbus RTU Master Connections
1

Contiguous Data Areas
200 Total - 100 reads & 100 writes

Data Area Limits
500 Contiguous Coils or 500 Contiguous Registers

Modbus TCP/IP Client Features

Modbus Operation Modes
Modbus TCP/IP Client

Function Codes Supported
1, 2, 3, 4, 5, 6, 15 & 16

Swapping
Byte and Word Swapping

Maximum Modbus TCP/IP Server Devices
32

Number Read/Write Scan Lines per Server Device
200 Total - 100 reads & 100 writes

Scan Line Support
Up to 125 Registers or 512 Coils

Gateway Security

You can configure up to 9 different users access to diagnostic and configuration screens.

Alarming

Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table

Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters

Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page

Allows users to see and log start up sequences, protocol specific messages & error messages.

 

460MCMRS-N2EW
DATASHEET  USERGUIDE
460MCMRS-N2E
DATASHEET  USERGUIDE
460MCMRS-N34
DATASHEET  USERGUIDE
460MCMRS-N700
DATASHEET  USERGUIDE
460MCMRS-NNA1
DATASHEET  USERGUIDE
460MCMRS-NNA4
DATASHEET  USERGUIDE
Click here to download our Gateway Comparison PDF